276°
Posted 20 hours ago

AVM compatible FRITZ!Repeater 2400, 802.11a/b/g/n/ac, 2,4GHz/5GHz

£9.9£99Clearance
ZTS2023's avatar
Shared by
ZTS2023
Joined in 2023
82
63

About this deal

Fritz! Repeater 3000 AX is a Wi-Fi range extender that helps users extend the range of their Wi-Fi network. It connects to an existing Wi-Fi network and rebroadcasts the signal to increase the coverage area of the network. This device can also improve the speed and stability of the Wi-Fi network, making it a great option for homes with multiple devices. Once set up you’ll need to find a good position, you want to place this where the existing WiFi signal is OK rather than non-existent. The repeater takes your existing signal and boosts it so it is stronger and can reach further. Connect your FRITZ!Repeater to your FRITZ!Box via Wi-Fi to increase the Wi-Fi range of your home network easily and efficiently. If you are using a FRITZ!Box with FRITZ!OS 7 or later, the FRITZ!Repeater is automatically integrated into the Mesh and marked in the FRITZ!Box user interface with the Mesh symbol . The FRITZ!Repeater then adopts all of the settings from the FRITZ!Box, such as Wi-Fi access information and guest access. In the Mesh, your wireless devices automatically connect to the wireless access point that offers the best Wi-Fi reception.

Those who want really fast Internet will probably put up with the high power costs. After all, the AVM Fritz! Repeater 6000 delivers a really strong performance, not least thanks to its tri-band technology. Especially when using a Fritz! router, the three different frequencies should ensure that a highly stable network can be established. Finally, the AVM Fritz!Repeater 6000 uses one frequency exclusively for the connection to the FRITZ!Box. Alternatively, the FRITZ!Repeater 6000 can also be used to create a LAN bridge. This way, the WLAN signal of your router is amplified without losing bandwidth.Of course, a repeater can only reliably amplify the WLAN if it itself establishes a sufficiently good connection to the router. AVM’s compact repeater conveniently helps you find the perfect position. An LED indicator on the FRITZ! Repeater 6000 itself is used for this. If you want to be even more on the safe side, you can simply use the app for optimal positioning. Comprehensive Features To configure the Wi-Fi settings of Fritz! Repeater 3000 AX, you need to follow the steps given below: a b All Fritz!Box devices supporting IEEE802.11ac standard can operate in 2.4GHz and 5GHz bands simultaneously (dual-band operation). Fritz!Box models supporting plain IEEE802.11a standard operate in a single band, selectable by the user.

Supports G.fast for VDSL speeds up to 1 Gbit/s; features an additional Ethernet port for WAN connection In this guide we show you how to easily connect your FRITZ!Repeater with your FRITZ!Box at the touch of a button (WPS - Push Button Configuration).

Important:If the WLAN LED only flashes briefly and then goes out, an older FRITZ!OS is installed. In this case, push the WPS button on the FRITZ!Repeater again briefly; when the WLAN LED lights up again, push and hold down the WLAN button for about 6 seconds until the WLAN LED flashes. a b Highest OS version (• = still under maintenance; current version is 07.29 as of October 2021; not all models receive the newest OS at the same time, and some version steps are only available to certain models). Within 2 minutes: Push and hold down the Connect button on the FRITZ!Box until the Connect LED lights up. Other LEDs may also light up: FRITZ!Box model

band (800, 850, 900, 1800, 2100, and 2600 MHz) LTE modem. Supported speed and bands depend on the hardware version. [4]

Fritz! Repeater 3000 AX can extend the range of a Wi-Fi network up to 2400 square feet, making it a great option for homes of all sizes. Call information: Along with the Device ID, the call information belong to a group predefined by Google. This call information is not used by the app. Since August 2018, Google's technical guidelines allow Android apps to display information on the wireless environment only if "location" rights have been enabled for the app. AVM has no influence on these Android guidelines. The charts below compare hardware and firmware features in the FRITZ!Box device range. [1] Current models [ edit ] Travel Tech We’ve tested out dozens of products over the last few years to bring you review of gadgets to take on the move.

Fritz! Repeater 3000 AX is designed to work with any router that supports Wi-Fi, making it a flexible and versatile choice for extending the range of your Wi-Fi network.Microphone: The microphone and the camera belong into a group predefined by Google. This microphone function is not used by the the app. With FRITZ!App WLAN you can keep an eye on your wireless network at all times. Use the FRITZ!App WLAN for an easy connection from your Android smartphone or tablet to the wireless LAN of your FRITZ!Box or any other WLAN router. The FRITZ!App WLAN also provides you with useful details about the existing wireless connection. A graphic diagram presented in the FRITZ!App WLAN offers you additional transparency about the channel assignments of the various devices in your wireless LAN environment. English version only. Includes a second VDSL2 port for ADSL bonding. One USB port doubles as eSATA port. Fritz! Repeater 3000 AX can connect to a maximum of 253 devices simultaneously, making it a great option for homes with multiple devices.

Asda Great Deal

Free UK shipping. 15 day free returns.
Community Updates
*So you can easily identify outgoing links on our site, we've marked them with an "*" symbol. Links on our site are monetised, but this never affects which deals get posted. Find more info in our FAQs and About Us page.
New Comment