276°
Posted 20 hours ago

Furniture Clinic Wood Stain (Walnut) – Fast Drying, Highly Concentrated, and Easy-to-Apply Wood Stain for All Indoor & Outdoor Wood – Water Based & Non-Toxic – 250ml

£9.9£99Clearance
ZTS2023's avatar
Shared by
ZTS2023
Joined in 2023
82
63

About this deal

The longer you leave the excess on the surface to soak in the deeper/richer the colour will appear. We therefore recommend removing it after only a minute or two and if it dries too light, you can apply another coat. However, if you apply too much and it dries too dark, it is much harder to sand, strip and then re-stain the wood! Pine & Softwoods – Once you have prepared the surface as above you should apply a Pre-Stain Conditioner. This is because softwoods absorb wood stains in an uneven fashion and could come out blotchy once stained. If you don't have a conditioner, you should wipe the wood down with a wet cloth so the wood becomes damp. After the wood dries, sand it smooth using a #100 Fine Sanding Pad - this process helps reduce the uneven absorbtion of stain often found in softwoods. A. Yes you can. Our Wood Stain has been designed to deeply penetrate all wooden surfaces. However, you’ll always get best results by giving the wood a light sand first with #100 Sanding Pads. The Wood Stain instructions below explain thoroughly how to prepare wood, stain wood, and then how to protect wood afterwards. They will help you get the best results when using our Wood Stain. Preparing Wood for Staining For reasons of hygiene and safety, personal grooming products, cosmetics or items of intimate clothing cannot be returned.

Our Wood Stain is specially formulated to evenly dye wood, ensuring equal and even colour penetration throughout. The stain dries to a natural matt finish in only 10 minutes and has excellent coverage. Finishing wood after staining Unwanted Food or Drink Products - Once supply conditions are broken, there are a number of factors outside of our control that can affect the quality of a product. Therefore perishable goods such as food and drink cannot be returned.After staining wood, you should finish the job by sealing the stain in with one of our Wood Waxes, Wood Varnishes or Wood Oils. These will enhance the colour of the stain further, provide additional protection and can be used to alter the finish to either satin or gloss. Wood Stain Options A. If the surface is dirty clean it first with a suitable Wood Cleaner. Otherwise, sand it with #100 Sanding Pad in the direction of the grain. If the wood is freshly sawn, you may need to start with something more coarse such as 120g sandpaper and work your way up with the Sanding Pads. Our Wood Stain can be used to restore or change the colour of all types of interior and exterior wood. It can be used to stain old wood, as well as brand new wood and is easy and simple to use. If you are unsure of the wood stain colour, test it on an unseen area first. The stain can be applied with either a cloth, bristle brush, or for best results a Foam Brush. Apply the stain liberally going in the direction of the grain. Leave it to soak in for a minute or two and then wipe any excess of using a Lint Free Cloth.

Buy our Tester Kit that includes 9 colours of Wood Stain that we do(15ml Tester Pots in Slate, Warm Graphite or Grey are not included in the Tester Kit).A. You shouldn’t sand wood after you’ve applied a Wood Stain. The wood should be sanded prior to staining. If the wood stain raises the grain of the wood, you can sand the wood and then restain. Using wood stain on external items and surfaces offers both homeowners and professionals several big advantages. For example, it prevents the wood from rotting if it hasn't already been sealed. It also protects wood from moisture and sun damage, preventing the wood from breaking in freezing temperatures and unsightly discolouration. New Wood – Needs to be sanded first to create a lovely smooth finish prior to applying the Wood Stain. Sand first with 120g sandpaper, then with a #60 Coarse Sanding Pad (240g sandpaper), and again with #100 Fine Sanding Pad (320g sandpaper). This process will help even out the surface, creating a lovely smooth finish for the stain to absorb into.

A. Wood Stain is designed to penetrate into the wood and so the longer you leave it on the more it will soak in and the darker the wood will become. Wood can also only absorb so much stain before it becomes saturated and so any excess would then dry on the surface. This is why we recommend wiping the stain off after one or two minutes. But that's not all - this woodstain also provides a stunning satin finish that enhances the natural beauty of your wood surfaces. Its smooth and even coverage allows for a beautiful and professional-looking finish that will make your wood surfaces stand out. But that's not all. Johnstone's Indoor & Outdoor Woodstain is also an eco-friendly choice, made with low VOC technology. This means that it has a reduced impact on the environment, making it safe to use in your home or garden. A. Sealing wood after staining isn’t required, but it is recommended. Not only do wood finishes enhance the colour but they’ll also protect the wood from scratches and help stop it from fading. We recommend using a Wood Varnish.A highly concentrated wood stain that stains wood in one simple application. The formulation is water-based and so is safe to use in all environments, has a very low odour and is non-toxic. A. We recommend leaving the stain to soak into the wood for one or two minutes before wiping the excess off. This will prevent the stain from staining the wood too dark; you can then apply a second application of Wood Stain if you want to darken the wood further. After staining the wood, it should be finished with a varnish, oil or wax. The Wood Stain is colourfast once dry but by applying a finish you can: In all instances, ensure the surface is clean and any saw dust or dirt has been removed before applying the Wood Stain. Applying Wood Stain But that's not all - this woodstain also provides a stunning satin finish that enhances the natural beauty of your wood surfaces. Its fast-drying formula means that you can achieve a beautiful finish in a fraction of the time it takes for traditional woodstains.

Used Wood - If the wood is old, it may be painted or varnished. If so, remove any old coatings using a Paint & Varnish Remover first. These coatings will prevent the Wood Stain from soaking into the wood. If the wood has been treated with an oil or wax, wipe the surface down with thinners or mineral spirit to remove this. After removing the old finish, sand smooth with #100 Fine Sanding Pad.After wiping off the excess Wood Stain, you’ll need to wait for about 10 minutes for the stain to thoroughly dry. Once it’s dry, a second coat can be applied if desired; applied in the same way as the first.

Asda Great Deal

Free UK shipping. 15 day free returns.
Community Updates
*So you can easily identify outgoing links on our site, we've marked them with an "*" symbol. Links on our site are monetised, but this never affects which deals get posted. Find more info in our FAQs and About Us page.
New Comment